- 【Details】☛Material: Lithium polymer; Battery voltage : 11.1V ; Capacity: 5200mAh; Discharge:60C; Plug:XT60; Configuration: 3S1P. 1P products with higher quality, more durable and battery life is longer.
- 【Dimensions】☛139*47*36mm /5.47*1.85*1.42inch(L*W*H)/pc,383g/13.5oz/pc
- 【Applicable equipment】☛3S 60C 5200mAh Hard Case Lipo Battery with XT60 Connector is designed for RC airplane,RC vehicles,RC boat.Such as RC Car, RC Buggy, RC Truck, RC Truggy ect. 1/8 and 1/10 rc car such as Losi, Slash, HPI Strada XB 1/10 RTR Electric Buggy, Team Associated, Axial, Tamiya, Duratrax, Jammin, Exceed RC, ElectrixRC, Emaxx, Bandit, Rustler version etc.(Only if the voltage, dimension and the plug match, then it will fit).
- 【Function】☛Socokin 3S 60C discharge rate rc lipo battery ‘s high speed charging and excellent endurance power provide good Experience for your remote control equipment in activities.
- 【What you get】☛2 hard case socokin 5200mAh 60C 11.1V RC Lipo battery.If you have any question,please contact us.Any issues about the battery, please enter Your Order for help or contact us via our customer service email.
From the brand
Socokin Power Direct
Socokin High Power Lipo Battery
-
Socokin is one of the largest lipo battery manufacturers specializing in battery design,research, manufacturing,and production of Li-Polymer rechargeable batteries with the mission of providing safe, durable, professional rc lipo batteries.
Socokin have strict QC teams,providing high quality RC batteries which are widely used for RC cars, airplanes, helicopters, boats, Drones, UAV, FPV and etc.
-
-
-
First Use
1.when first open,user should take a visual check on the pack to see if there’s any damage,puffiness or visualize broken seal problem. If it comes to these problem,please do not use and return the pack for replacement.
3. All new battery packs will have a voltage of about 3.65V to 3.9V per cell. (Lithium iron phosphate packs will have a voltage of about 3.2V to 3.4V per cell.) This voltage range also applies to the 1S (1 cell) battery pack. The voltage of a 2S battery pack is about 7.60V-7.85V (the voltage of a lithium iron phosphate battery pack is about 6.4V-6.8V), and so on.
-
Charging Instruction
1.You must use Lithium Polymer(LiPo) specific charger only.
2.Never leave you batteries charging unattended.
3.Charge in an isolated area,away from flammable materials.
4.Make sure selecting the voltage or cell count for charging purposes.
5.You must check the pack voltage after each use before recharging.
6.The charge rate should not exceed 1C unless it is other specific.
-
Storage & Transportation
1.Do not expose battery packs to direct sunlight or heat at anytime.
2. Do not store the battery in the vehicle trunk.
3.Store batteries at room temperature between 40 and 70 degrees F for best results.
5.Storing at high temperature environment may cause fire, do not store at the area over 150 degrees F.
-
How to Take Care
1.Only charge LiPo battery with good quality LiPo specified charger which is in good condition or else can be very dangerous.
2.Always cool down the battery after use before recharging.
3.Do not puncture the pack or else it may cause fire, do not use if it is punctured.
4.Never attempt to disassemble the battery pack.
5.Avoid the pack from contacting water, do not use if it dose.
6.Do not attempt to solder to the battery on your own, only use connector.
-
Battery Life & Disposal Handling
1.Batteries that lose 20% of their capacity should not longer in use and they should be properly disposed.
2.When dispose the battery, ensure the anode and cathode are properly wrapped and insulated.
When Have Problem With Our Product
1. Enter into “Your Orders” to click “Contact Seller” option.