- 【Details】☛Material: Lithium polymer;Battery voltage: 22.2V ;Cell voltage: 3.7~4.2V; Capacity: 4000mAh; Discharge:80C;Plug:EC5;Balanced charging plug:JST-XHR;Configuration:6S1P. 1P products with higher quality, more durable and battery life is longer.
- 【Dimensions】☛132*42*48mm/5.19*1.65*1.89 inch(L*W*H); Approx Weight:599g/21.13 oz/pc
- 【Applicable equipment】☛6S 80C 4000mAh Soft Case lipo battery with EC5 Connector is designed for RC airplane,RC vehicles,RC boat.Such as hobby models: RC 1/8 , 1/10 scale cars, RC trucks, and buggies and RC Boats,Align T-REX 550/ 700E F3C/ 700L/ 800E RC Airplane, Quadcopter and so on.(Only if the voltage, dimension and the plug match, then it will fit).
- 【Notice】☛No matter what brand of battery, you should wait until the battery is completely cooled before charging, otherwise it will seriously damage the battery.When charging, it is recommended that the current is half to 2 times the battery capacity.
- 【What you get】☛1 Socokin 4000mAh 80C 22.2V RC Lipo battery.If you have any question,please contact us.
From the brand
Socokin Power Direct
Socokin High Power Lipo Battery
-
Socokin is one of the largest lipo battery manufacturers specializing in battery design,research, manufacturing,and production of Li-Polymer rechargeable batteries with the mission of providing safe, durable, professional rc lipo batteries.
Socokin have strict QC teams,providing high quality RC batteries which are widely used for RC cars, airplanes, helicopters, boats, Drones, UAV, FPV and etc.
-
-
-
First Use
1.when first open,user should take a visual check on the pack to see if there’s any damage,puffiness or visualize broken seal problem. If it comes to these problem,please do not use and return the pack for replacement.
3. All new battery packs will have a voltage of about 3.65V to 3.9V per cell. (Lithium iron phosphate packs will have a voltage of about 3.2V to 3.4V per cell.) This voltage range also applies to the 1S (1 cell) battery pack. The voltage of a 2S battery pack is about 7.60V-7.85V (the voltage of a lithium iron phosphate battery pack is about 6.4V-6.8V), and so on.
-
Charging Instruction
1.You must use Lithium Polymer(LiPo) specific charger only.
2.Never leave you batteries charging unattended.
3.Charge in an isolated area,away from flammable materials.
4.Make sure selecting the voltage or cell count for charging purposes.
5.You must check the pack voltage after each use before recharging.
6.The charge rate should not exceed 1C unless it is other specific.
-
Storage & Transportation
1.Do not expose battery packs to direct sunlight or heat at anytime.
2. Do not store the battery in the vehicle trunk.
3.Store batteries at room temperature between 40 and 70 degrees F for best results.
5.Storing at high temperature environment may cause fire, do not store at the area over 150 degrees F.
-
How to Take Care
1.Only charge LiPo battery with good quality LiPo specified charger which is in good condition or else can be very dangerous.
2.Always cool down the battery after use before recharging.
3.Do not puncture the pack or else it may cause fire, do not use if it is punctured.
4.Never attempt to disassemble the battery pack.
5.Avoid the pack from contacting water, do not use if it dose.
6.Do not attempt to solder to the battery on your own, only use connector.
-
Battery Life & Disposal Handling
1.Batteries that lose 20% of their capacity should not longer in use and they should be properly disposed.
2.When dispose the battery, ensure the anode and cathode are properly wrapped and insulated.
When Have Problem With Our Product
1. Enter into “Your Orders” to click “Contact Seller” option.