- ❃❃ ABS material shell: exquisite and beautiful, 1.8mm ultra-thick design, high mechanical strength, good electrical performance.
- ❃❃ Temperature control range: -50-110°C; Control accuracy: 0.1 °C. Input power: DC 24V; Output Power: 240W(MAX). Output: 10A (MAX), input/output synchronization, can meet all kinds of large power load.
- ❃❃ 3 Buttons for easy operation, to set start temperature, stop temperature, corrected temperature, delay start time; LED Indicator Light: Display the current output status; Digital Display Tube: Shows measuring temperature, high accuracy of temperature measuring and controlling.
- ❃❃ Can be widely used in a variety of fields: hvac, dehumidifier, test and test equipment, automobile, automatic control, weather station, humidity regulator and other related temperature detection and control.
- ❃❃ Package Included: 2*W3002 Digital Thermostat Module, 1*Temperature probe sensor(Note: The NTC probe is waterproof, allows to control the temperature even of fluids, allowing the controlled heated or cooling.).
Product Description
- XH-W3002 12V / 24V / 220V Digital LED Temperature Controller Thermostat Control Switch NTC 10K Probe
Usage
Specification
Parameter
- Main material: ABS
- Output: 10A(Max)
- Temperature Measurement Range: -50~110℃
- Temperature Control Range: -50~110℃
- Measurement Accuracy: +/- 0.2℃
- Control Accuracy: +/- 0.1℃
- Output Power: 1500W (MAX) Output Type: Direct output (input/output synchronization)
- Installation Hole Distance: 73mm / 2.87in(aperture 4mm/1.73in)
- Item Size: 6 * 4.5 * 3.1cm / 2.36 * 1.77 * 1.22in
- Package Included: 1pcs XH-W3002 Temperature Controller
How to use:
- 888: Power on, press the UP and DOWN buttons at the same time more than 3 seconds, restore factory setting.
- LLL: In use, means sensor is fault.
- HHH: In use, means the temperature is above the range.
- Press the setting button, enter the internal menu. Press the up and down to switch setting parameter.
- P0: Set Start temperature
- P1: Set stop temperature
- P2: Set temperature calibration(Detect temperature + corrected temperature = actual temperature)
- P3: Set delay start
- Press the setting button, use the up or down button to set delay time( Minutes )
Instruction:
| Two Work Mode: | Heating: start temperature is less than stop temperature; Cooling: start temperature is above than stop temperature. |
| Precise and reliable | Good long-term stability. With fixing screw hole, convenient for install and fixed. Small size, low power consumption, fast response. |
| Sensor features: | 1. The bright digital tube is clearly displayed, and it can be clearly read whether it is used during the day or at night. 2. The sensor can be replaced at will by using the 2P terminal. When you need to use other probes, you can replace it at will. 3. Wiring input and output design, more convenient to use in various industrial equipment, multi-strand wire 300V/20A over-configuration, safe and reliable. |