Product Description

Rosewood composite wood veneer sheet 24″ x 96″ with no backing 2′ x 8′ x 1/42″ thickness. Similar to Santos or South American Rosewood. Composite veneer is real wood that has been dyed and cut for consistent, clean appearance and to remove the natural defects often found in regular grown trees. Otherwise, just like normal wood veneer. One piece per price. Very popular product. Some photos may show other sizes, customer projects and wet or finished veneer. Ships rolled in corrugated flute and sometimes also boxed. Other sizes and backed veneer sheets are available. Product code # 2305.

Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.

About pictures
: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.

Backed products
come with complete application instructions
that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.

Thickness
: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut
: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply
: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish
: most any conv